Engineering, 23.04.2021 16:00 jlbradley429

Penicillin G reacts with hydroxylamine (NO2OH) to form hydroxamic acid, which produces a colored complex with iron(III). To determine the overall reaction order, equal concentrations of penicillin and NH2OH were mixed together in a 250-mL flask [J. Chem. Educ., 49, 539 (1972)]. Samples were withdrawn every 10 minutes and added to a solution containing iron(III) chloride. With the aid of a colorimeter, the concentration of the colored complex, and hence the concentration of hydroxamic acid, was obtained as a function of time. The absorbance shown in the table below is directly proportional to the hydroxamic acid concentration. Time(min) 0 10 20 30 40 50 infinity
Absorbance 0.00 0.337 0.433 0.495 0.539 0.561 0.665
(a) Use the nonlinear least squares (i. e., regression) and one other technique to determine the reaction order, , and specific reaction rate, k.
(b) What experimental conditions would you suggest if you were to obtain more data?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, miguel454545

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

continue

You know the right answer?

Penicillin G reacts with hydroxylamine (NO2OH) to form hydroxamic acid, which produces a colored com...