subject
Engineering, 22.04.2021 21:50 jsph32

An axial turbine stage has an inlet temperature of 1400 K. At mid-radius, while operating at design speed and flow rate, the axial velocity ratio ca / U is 0.5, the degree of reaction is 50%, and there is no swirl in the absolute velocity leaving the rotor. The tip blade speed is 400 m/s, and the hub-to-tip radius ratio is 0.8. (a) Estimate the stagnation pressure ratio for the stage. (b) If, during off-design operation, the inlet flow conditions are unchanged but the blade speed increases 20%, show how the change i

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
image
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
You know the right answer?
An axial turbine stage has an inlet temperature of 1400 K. At mid-radius, while operating at design...

Questions in other subjects:

Konu
History, 06.04.2021 02:40