Engineering, 20.04.2021 21:20 katerin4738

4. In the circuit VREF = 2.5 V, and VIN = 1.5 V. The output voltage is 8+ Vcc
%
H+
VN
Vour
VREF
b- Vec
어.
언
어
(a) 1.5y
(6) 2.5y
(c) Close to positive biasing voltage
(d) Close to negative biasing voltage
Justify your answer with proper explanation

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

Engineering, 06.07.2019 05:20, alexisbreton

An ideal gas expands in an adiabatic turbine from 1200 k and 900 kpa to 800 k. determine the turbine inlet volume flow rate of the gas, in m'/s, required to produce turbine work output at the rate of 650 kw. the average values of the specific heats for this gas over the temperature range and the gas constant are op 1.13 kj/kg. k, v 0.83 kj/kg k, and r 0.30 kj/kg k

Answers: 2

continue

Engineering, 06.07.2019 05:30, beautifu3

Measuring the distance between two trees, you measure that there are 75.5 steps between the two trees. give an estimate of the unit of measurement of one step in meters and give an estimate of what you think its uncertainty is. give the distance that separates the trees in meters as well as feet/inches and round to the correct amount of significant digits. what would you say are the uncertainties for the these two distances

Answers: 3

continue

You know the right answer?

4. In the circuit VREF = 2.5 V, and VIN = 1.5 V. The output voltage is 8+ Vcc
%
H+
...