Engineering, 19.04.2021 18:10 Johnson926
Calculate the amperage of the service required for a house measuring 40' times 50'. To determine the size of electrical service entrance, the size of the house, lighting, and appliances should be considered. Also, consider the type and number of branch circuits. Use the minimum code requirement of three watts per square foot to calculate the lighting circuits. Allow a minimum of two small-appliance circuits for the kitchen and one small-appliance circuit for the workshop. Include an electric range with oven, refrigerator, washer, electric dryer dishwasher, garbage disposal, furnace, and a 2000-watt water heater. Refer to the chart in the text for appliance electrical requirements.
Answers: 1
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Calculate the amperage of the service required for a house measuring 40' times 50'. To determine the...
Social Studies, 26.09.2019 01:40
Social Studies, 26.09.2019 01:40
Mathematics, 26.09.2019 01:40
Social Studies, 26.09.2019 01:40