Engineering, 19.04.2021 15:30 mariamakonteh31
The frame supports a centrally applied distributed load of 1.8 kip/ft. Determine the state of stress at the critical location. The pins at C and D are at the same location at the neutral axis for the cross-section. If the frame is made of steel with tensile strength 25 ksi and compressive strength of 30 ksi, determine the safety factor.
Answers: 2
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
The frame supports a centrally applied distributed load of 1.8 kip/ft. Determine the state of stress...
History, 13.01.2020 17:31
Mathematics, 13.01.2020 17:31
Mathematics, 13.01.2020 17:31