subject
Engineering, 16.04.2021 18:20 lizdominguez101

The Orono Sand and Gravel Company has made a bid to supply sand for Eau Gallie new sand filter. The request for bids stipulated that the sand have an effective size in the range 0.35 to 0.55 mm and a uniformity coefficient in the range 1.3 to 1.7. Orono supplied the following sieve analysis as evidence that their sand will meet the specifications. Perform a grain size analysis (semi-log plot) and determine whether or not the sand meets the specifications. U. S. Standard Sieve No. Mass percent retained
8 0.0
12 0.01
16 0.39
20 5.70
30 25.90
40 44.00
50 20.20
70 3.70
100 0.10

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
image
Engineering, 04.07.2019 19:20, anggar20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
The Orono Sand and Gravel Company has made a bid to supply sand for Eau Gallie new sand filter. The...

Questions in other subjects:

Konu
Mathematics, 12.03.2021 19:50
Konu
Mathematics, 12.03.2021 19:50
Konu
Mathematics, 12.03.2021 19:50
Konu
History, 12.03.2021 19:50
Konu
Chemistry, 12.03.2021 19:50