subject
Engineering, 15.04.2021 15:30 alexanderavrett

Design an automotive suspension such that the vertical acceleration felt by the driver is less than 2g for all speeds between 40 and 80 mph. Assume the road surface has an amplitude of 0.5 feet and wavelength equal to 3.14 ft. Model the vehicle as a single degree of freedom (base excitation) system with a vehicle/driver weight of 1500 lb and a damping ratio of 0.05. Use a Matlab script to: Select a stiffness value that meeting the acceleration requirement. Calculate the displacement transmissibility for all speeds between 40 and 80 mph. Use the displacement transmissibility to find the acceleration for all speeds. Plot the magnitude of the acceleration that the driver feels for all speeds between 40 and 80 mph.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
You know the right answer?
Design an automotive suspension such that the vertical acceleration felt by the driver is less than...

Questions in other subjects: