The HAZCOM standard requires that chemical hazards in the workplace are

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false