Engineering, 09.04.2021 02:20 genyjoannerubiera
A pipeline is proposed to carry 90 deg F water to the top of a spray cooling pond. Flow through the smooth pipe which has an outside diameter of 36 in and a wall thickness of 3/8 in, is to be 26,000 gpm. The friction factor for the pipe is 0.01. For the proposed system the pressure at the pump inlet is 20 psig, and the equivalent length of the pipe from the pump outlet to the pipe exit is 2425 ft. The pond is 160 ft above the pump. For the conditions given, the operating head of the pump (ft) is most nearly:
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
A pipeline is proposed to carry 90 deg F water to the top of a spray cooling pond. Flow through the...
Questions in other subjects:
History, 20.12.2019 07:31
Social Studies, 20.12.2019 07:31
English, 20.12.2019 07:31
History, 20.12.2019 07:31
