subject
Engineering, 08.04.2021 15:40 dchannakhone84

A standard seeded BOD5 test was conducted in a laboratory. It was revealed that the initial DO concentration in a BOD bottle which had been filled with 8 mL of wastewater sample and 292 mL of seeded dilution water was 8.9 mg/L just after preparation. After an incubation period of five days, the final DO concentration was reported as 1.4 mg/L. Meanwhile, DO concentration in the control bottle with seeded dilution water decreased from 9.0 to 8.8 mg/L within five days. a) What is the 5-day BOD of the wastewater sample? b) What would be the 5-day BOD of the wastewater sample if the technician tested the wastewater with the same dilution, this time without seeding, and found out that the DO changed from 8.9 to 1.4 mg/L again? c) Considering both results obtained in (a) and (b), what kind of wastewater do you think the sample belongs to? Discuss your answer. (Hint: Make sure to keep the P and f as ratios (without rounding off) until the end of the calculation.)

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 08:10, doggo242
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
image
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
image
Engineering, 04.07.2019 18:10, jadeochoa4466
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
You know the right answer?
A standard seeded BOD5 test was conducted in a laboratory. It was revealed that the initial DO conce...

Questions in other subjects:

Konu
Mathematics, 18.03.2021 03:10
Konu
Mathematics, 18.03.2021 03:10
Konu
World Languages, 18.03.2021 03:10
Konu
Mathematics, 18.03.2021 03:10