Engineering, 06.04.2021 02:50 lucerogon7403

1. (25 points) In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22oC. The refrigerant enters the condenser at 16 bar and 160oC, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 150 kW, determine (a) the mass flow rate of refrigerant, in kg/s. (b) the power input to the compressor, in kW. (c) the coefficient of performance. (d) the isentropic compressor efficiency.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 19:20, rosemary909

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

continue

Engineering, 04.07.2019 19:20, amandaaarmentaa

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

continue

Engineering, 06.07.2019 05:10, aaronolivera200161

Air contained in a piston-cylinder assembly undergoes a process from an bar. the initial pressure of 1 bar and temperature of 400 k to a final pressur initial volume of air is 0.2 m3. the process is described by pv- constant. assuming ideal gas behavior and neglecting kinetic and potential energy effects, determine the a)-mass of air, in kg b)-work for the process, in kj c)-heat transfer for the process, in kj pts

Answers: 1

continue

You know the right answer?

1. (25 points) In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated...