subject
Engineering, 06.04.2021 02:40 jasonr182017

You are considering the purchase of a temperature measurement package, consisting of both a temperature sensor and signal conditioningelectronics, whose output voltage(in Volts)inthe Laplace domain, Y(s), is related to temperature(in Celsius)in the Laplace domain, (s), by: Y(s)=0.1s+1(s)Suppose you apply a 5-degree step change in temperature to this sensor, meaning that (s)=5/s.1.Write an expression for Y(s)in the Laplace domain (1 point). 2.Solve for the output voltage, y(t), in the time domain, assumingan initial temperature of zero and a corresponding initial output voltage of zero(1 point). 3.What is the steady-state output voltage? (1 point)4.How long does it take for the output voltage to reach 90% of its steady-state value?(1 point)

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
You are considering the purchase of a temperature measurement package, consisting of both a temperat...

Questions in other subjects:

Konu
Mathematics, 07.06.2021 14:00
Konu
Chemistry, 07.06.2021 14:00