Engineering, 05.04.2021 14:00 angela6844

Study the information below and answer the question that follow: A business tourist travelled from Cape Town to Johannesburg. His flight lands at
OR Tambo International Airport. He attends a conference in Centurion. The hotel in
Centurion arranged for a shuttle to pick him up from the nearest Gautrain station.
The tourist is worried and unsure if he will be able to use the Gautrain and be on time for
the shuttle.
QUESTION
Indicate the best route for the tourist on the maps by also outlining the steps
that he must follow (Step 1, Step 2, Step 3 etc.) on the maps.
There after write out the steps in sentences step-by-step under the following
headings numbered as a) and b):
a) The route to the Gautrain station at OR Tambo International Airport
b) The route the Gautrain will follow and indicate the transfer station and the
Gautrain station where he will find the shuttl

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

You know the right answer?

Study the information below and answer the question that follow: A business tourist travelled from...