subject
Engineering, 03.04.2021 05:20 itscheesycheedar

An isothermal CSTR with a first order irreversible reaction A â> B (and rA[mol/(ft3*min)] = - 0.5 CA) has a constant flow rate of 29.0 ft^3/min. The reactor volume is 100 ft3. If the inlet concentration CAi is 7.3 moles/ft^3 at t = 0 and the initial outlet concentration CA is 2.3 moles/ft^3. Required:
Determine the outlet concentration CA after t = 2.9 min

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
An isothermal CSTR with a first order irreversible reaction A â> B (and rA[mol/(ft3*min)] = - 0.5...

Questions in other subjects:

Konu
Physics, 18.03.2021 01:00