subject
Engineering, 02.04.2021 22:40 DWilson1234

A transect of piezometers have been drilled into a deep, confined aquifer composed of sand. For a porosity of 30% and a hydraulic conductivity of 32.8 m/d, estimate the specific discharge, actual velocity, and time of travel for the water to move 5km from its recharge zone. Piezometer Head (m) Distance (km)
1 50 0
2 45 2.5
3 40 5

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
You know the right answer?
A transect of piezometers have been drilled into a deep, confined aquifer composed of sand. For a po...

Questions in other subjects:

Konu
Mathematics, 16.11.2020 18:10
Konu
Mathematics, 16.11.2020 18:10