Engineering, 02.04.2021 19:00 magaaalimartinez
The ultimate BOD of the Susquehanna River just below a sewage outfall from Harrisburg is 50.0 mg/L, and the DO is at the saturation value of 10.0 mg/L. The deoxygenated rate coefficient (kd) is 0.30 day-1, and the reaeration rate constant (kr) is 0.90 day-1. The river is flowing at a speed of 48 miles/day. The only source of BOD is the sewage outfall.
Required:
a. Find the critical distance downstream at which DO is a minimum.
b. Find the minimum DO.
c. If a wastewater treatment plant were to be built, what fraction of BOD would need to be removed from the sewage to ensure that downstream DO concentrations stay above 5.0 mg/L
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 19:10, rayne40
A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?
Answers: 3
You know the right answer?
The ultimate BOD of the Susquehanna River just below a sewage outfall from Harrisburg is 50.0 mg/L,...
Questions in other subjects:
Chemistry, 07.04.2020 20:14
