Engineering, 30.03.2021 19:30 Anliz0179
Consider an ideal ramjet engine flying at an altitude of 10,000 m (see local atmospheric conditions in appendix III of the textbook). The jet fuel used has a heat of combustion of 43,000 kJ/kg, and a stoichiometric fuel to air ratio of 0.06. The maximum temperature of the ramjet is 2600 K. Assume the specific heat ratio up to the combustion chamber is 1.4, and that the specific heat ratio through the rest of the engine (including the combustoris 1.33. The specific heat at constant pressure for the gases in the combustor can be calculated using the following equation:
where R is assumed to be 0.287 kJ/kgK throughout the engine. Calculate the specific thrust and TSFC as a function of flight Mach number from a range of to 6. Note that the fuel to air ratio can not be above the stoichiometric value (i. e. we can't burn more fuel than that at an equivalence ratio of unity). Some operating points may require a higher value of f than the stoichiometric value to reach the temperature limit. Under this condition, fshould be set to the stoichiometric value, and the combustor exit temperature Tos should be calculated from the energy equation. Otherwise, the maximum temperature is used and fis calculated from the energy equation. Using a procedure and an if/then/else approach in EES might be ideal for this. Include the following plots:
1. Specific thrust (I) vs. Mnlight
2. TSFC vs. Mnlight .
3. To4 vs. Mnight
4. Aexit/Athroat VS. Might
5. ?th, np, and ?°vs. Mflight
Answers: 3
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 06.07.2019 03:10, DeathFightervx
Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)
Answers: 3
Consider an ideal ramjet engine flying at an altitude of 10,000 m (see local atmospheric conditions...
English, 28.09.2019 21:00
Social Studies, 28.09.2019 21:00
Biology, 28.09.2019 21:00
Physics, 28.09.2019 21:00
Social Studies, 28.09.2019 21:00