Consider the subsonic flow through a divergent duct with area ratio of A2/A1 = 1.7. If the inlet conditions are T1 = 300 K and u1 = 250 m/s, and the pressure at the exit is P2 = 1 atm, calculate: a. Inlet pressure P1 and b. Exit velocity u2.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?