Engineering, 29.03.2021 17:50 aaminohasan142
Sedimentation tanks in a water treatment plant are required to be designed to achieve a minimum hydraulic detention time of 3.0 hours and a maximum overflow rate (surface loading rate) of 750. gal/d/ft2. For a water production rate of 500,000. gal/d, determine the dimensions of rectangular sedimentation tanks required (length, width, depth). Round dimensions to the nearest ft. There should be a minimum of 2 tanks in parallel for reliability.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, Larkinlover703
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10, juneham
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
Sedimentation tanks in a water treatment plant are required to be designed to achieve a minimum hydr...
Questions in other subjects:
Mathematics, 29.10.2019 11:31
Mathematics, 29.10.2019 11:31
English, 29.10.2019 11:31
History, 29.10.2019 11:31
Mathematics, 29.10.2019 11:31
