Engineering, 26.03.2021 06:00 nicole10perez

2. Indique qué función del lenguaje predomina en cada uno de estos textos: ¡Haz silencio!
¡Estoy muy orgulloso de ti!
“La magia de sus ojos me hipnotiza”
¿Sigues en línea?
¡Te ordeno que lo hagas en este momento!
“Mañana habrá buen tiempo”
“Su sonrisa iluminaba todo a su alrededor”
¡Estoy exhausto!
No escucho bien…hay mucha interferencia
“Una copa de vino y una música suave lo hicieron olvidar sus penas”
¿Sensacional es un adjetivo grandilocuente?
¡Cuanta felicidad siento en este momento!
“Las clases serán suspendidas hasta nuevo aviso”
¡Carlota!, abre la puerta por favor
¿Qué significa la palabra fe?
¡Ay!, como de duele mi pie

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

You know the right answer?

2. Indique qué función del lenguaje predomina en cada uno de estos textos: ¡Haz silencio!
¡Es...