A shaft is made from a tube, the ratio of the inside diameter to the outside diameter is 0.6. The material must not experience a shear stress greater than 500KPa. The shaft must transmit 1.5MW of mechanical power at 1500 revolution per minute. Calculate the shaft diameter

shaft diameter = mm = 0.7055 mm

Explanation:

Ratio of inside diameter to outside diameter ( i.e. d/D )= 0.6

Shear stress of material ( Z ) ≤ 500 KPa

power transmitted by shaft ( P ) = 1.5MW of mechanical power

Revolution ( N ) = 1500 rev/min

Calculate shaft Diameter

Given that: P =  ---- 1

therefore; T = ( 1.5 *10^3 * 60 ) / ( 2 * 1500 )  = 9.554 KN-M

next

hence ; T = Z

attached below is the remaining part of the solution

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.