Engineering, 21.03.2021 23:50 iiisavageoreo

Q2: Use navigation sensors to track an AUV with acoustic transceivers and DVL Q2.1. We have two acoustic hydrophones to detect the sound transmitted from the AUV. As shown in the figure below, the range to the AUV measured by the #1 hydrophone is 200m and by #2 hydrophone is 215m, and the baseline, b, is 20 meters. What is the vertical and horizontal distance between the AUV and hydrophone #1? [10pts]. The equation that will be used is in Topic-4 presentation. (show full calculation steps)

Q2.2. The AUV is equipped with a DVL that transmits sound at 1MHz. The beam angle is 22.5 degrees. The AUV is moving at a speed, u, of 2 m/s. As presented in the lecture, we can separate it into two components, one along the sound transmission of #1 beam on the DVL, one is perpendicular to the sound transmission. Question: now let’s separate u relative to beam #2, draw the two components in the figure and compute the magnitude of the two components. [5pts]

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

You know the right answer?

Q2: Use navigation sensors to track an AUV with acoustic transceivers and DVL Q2.1. We have two aco...