Engineering, 19.03.2021 18:20 trashbinkid
The aluminum rod (E1 = 68 GPa) is reinforced with the firmly bonded steel tube (E2 = 201 GPa). The diameter of the aluminum rod is d = 25 mm and the outside diameter of the steel tube is D= 45 mm. The length of the composite column is L = 761 mm. A force P = 88 kN is applied at the top surface, distributed across both the rod and tube.
Required:
Determine the normal stress σ in the steel tube.
Answers: 1
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 19:10, juneham
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
The aluminum rod (E1 = 68 GPa) is reinforced with the firmly bonded steel tube (E2 = 201 GPa). The d...
Social Studies, 12.01.2021 04:00
English, 12.01.2021 04:00
Mathematics, 12.01.2021 04:00
Mathematics, 12.01.2021 04:00
English, 12.01.2021 04:00
English, 12.01.2021 04:00
Mathematics, 12.01.2021 04:00