Determine the LRFD design strength of the W12 x 30 section illustrated below. Assume A992 steel and that the bolt diameters are 7/8-in. For each flange, assume there are at least three holes in each line of bolts. You do not need to check block shear

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.