subject
Engineering, 18.03.2021 01:50 emmaguentherp3hjd3

ermine the Anozzle exit/A* required to achieve a Mach 5 flow at the inlet of thechannel with a cross-sectional area of 45 mm x 45 mm.2. What is the stagnation pressure needed for C-D nozzle to maintain a normal shockat the exit plane of the channel.3. How many tanks are required to run the facility for 2 mins?4. Determine the heat release for a stoichiometric combustion of hydrogen (ignoringfriction).5. Compare the stagnation pressure required for the ideally expanded scenario to thatof maintain a normal shock at the exit plane of the channel from 2 (non-reacting).225 mm45 mmC-D Nozzlef = 0.02Format: I encourage you to discuss this project with your classmates, but all formulas, analysis, computer coding, or reports should be done individually. The best way to really learn is through doing it yourself. Please show all your relevant work and steps of how you solved the problem. Regulators to hold

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 19:10, kimmy6973
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
ermine the Anozzle exit/A* required to achieve a Mach 5 flow at the inlet of thechannel with a cross...

Questions in other subjects:

Konu
Spanish, 01.04.2020 17:24
Konu
Mathematics, 01.04.2020 17:24