Engineering, 18.03.2021 01:30 lionscoachjose

Segments AB and BC of the assembly are made from 6061-T6 aluminum and A-36 steel shafts, respectively. The assembly is fixed at A and C. The dimensions for a, b, and d along with the load P are 120 cm, 75 cm, 10 cm, and 20 kN, respectively. The shear moduli of the aluminum and steel are 25 GPa and 75 GPa, respectively. Determine the maximum shear stress developed in each segment and the angle of twist at B due to the specified couple forces applied to the lever arm.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

You know the right answer?

Segments AB and BC of the assembly are made from 6061-T6 aluminum and A-36 steel shafts, respectivel...