subject
Engineering, 18.03.2021 01:20 lizzy2951

The heat transfer rate per unit width from a longitudinal section, x_{2}-x_{1}x 2 −x 1 , can be expressed as q_{12}^{\prime}=\bar{h}_{12}\left(x _{2}-x_{1}\right)\left(T_{s}T_{\inf ty}\right)q 12 = hˉ12 (x 2−x 1)(T s−T [infinity]), where \bar{h}_{12} h-12 is the average coefficient for the section of length \left(x_{2}-x_{1}\right)(x 2 −x 1 ). Consider laminar flow over a flat plate with a uniform temperature T_{s}T s The spatial variation of the local convection coefficient is of the form h_{x}=C x^{-1 / 2}, where C is a constant. (a) Beginning with the convection rate equation in the form d q^{\prime}=h_{x} d x\left(T_{s}-T_{\infty}\right)dq =h x dx(T s −T [infinity] ), derive an expression for \bar{h}_{12} hˉ12 in terms of C, x_{1}x 1 and x_{2}x 2 (b) Derive an expression for \bar{h}_{12} h-12 in terms of x_{1}, x_{2}x 1 ,x 2 , and the average coefficients \bar{h}_{1} hˉ1 and \bar{h}_{2} hˉ2 , corresponding to lengths x_{1}x 1 and x_{2}x 2, respectively.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 04.07.2019 19:10, jennymares
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
You know the right answer?
The heat transfer rate per unit width from a longitudinal section, x_{2}-x_{1}x 2 −x 1 , can be expr...

Questions in other subjects: