Engineering, 18.03.2021 01:20 niyahdabadest

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes the motor inductance. Find the transfer function with voltage as input and speed as output.
b) Develop the model that neglects the motor inductance. Find the transfer function with voltage as input and speed as output.
c) What are eigenvalue(s) for the system (for both models)? What is the corresponding time constant if the inductance of the motor is neglected?
d) Develop the model using Matlab: Simulate the step response of the motor to an input voltage of 24 Volts and compare the model with and without the motor inductance (plot the speed outputs on the same graph).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, koolgurl2003

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 06.07.2019 03:10, zah16

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

continue

You know the right answer?

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes...