subject
Engineering, 12.03.2021 15:20 normarismendoza

In each of the cases below, (a) through (e), you will need to explain why you chose the answer you did. The elementary isomerization exothermic reaction A>B
<
is carried out isothermally at 400 K in a PBR in which pressure drop plays a role, with alpha = 0.001 kg^-1. Currently. 50% conversion is achieved. The equilibrium constant at this temperature is 3.0.
a. For a fixed mass flow rate m, if the reactor diameter is increased by a factor of 4, the conversion will
(i) X > 0.5
(ii) X < 0.5
(iii) X = 0.5
(iv) insufficient information to tell.
b. For a fixed mass flow rate m., the equilibrium conversion is
(i) X_e = 0.5
(ii) X_e = 0.667
(iii) X_e = 0.75
(iv) insufficient information to tell
c. For a fixed mass flow rate m, if the reactor diameter is increased by a factor of 2 the equilibrium conversion X_e will
(i) increase
(ii) decrease
(iii) remain the same
(iv) insufficient information to tell
d. For a fixed mass flow rate m., if the particle size is increased, the equilibrium conversion
(i) increase
(ii) decrease
(iii) remain the same
(iv) insufficient information to tell
d. For a fixed mass flow rate m., if the particle size is the conversion will
(i) increase
(ii) decrease
(iii) remain the same
(iv) insufficient information to tell

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
image
Engineering, 04.07.2019 18:10, jesuslovesusall3
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
You know the right answer?
In each of the cases below, (a) through (e), you will need to explain why you chose the answer you d...

Questions in other subjects:

Konu
Mathematics, 02.04.2021 23:20
Konu
Mathematics, 02.04.2021 23:20