Engineering, 12.03.2021 15:00 jaredsmailandst
A 98% efficient ESP is to treat a gas stream flowing at 5000 m^3/min. If the effective drift velocity is 6.0 cm/s, calculate (a) the plate area (required and actual in m^2 and (b) the number of plates if each plate is 6 m by 10 m, and there are 3 sections in the direction of flow. Assume that the ESP of Problem 5.1 is built with an actual collection area of 5400 m^2. Now suppose that the actual drift velocity turns out to be 5.0 cm/s and the actual gas flow turns out to be 5500 m^3/min. Calculate the actual efficiency. An ESP must treat 500,000 acfm with 99% efficiency. Assuming an effective drift velocity of 0.4 ft/sec, calculate the required plate area in ft^2, and the number of plates if each is 20 ft tall by 10 ft long, and there are 4 sections in the direction of flow.
Answers: 3
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
A 98% efficient ESP is to treat a gas stream flowing at 5000 m^3/min. If the effective drift velocit...
Mathematics, 22.08.2019 17:00
Mathematics, 22.08.2019 17:00
Chemistry, 22.08.2019 17:00