subject
Engineering, 12.03.2021 14:50 tasiajm

g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) Fourier theory, (C) Maxwell theory. 2. The maximum power that can be extracted by a wind turbine is (A) 0.2963, (B) 0.593, or (C) 0.5 of the available wind power. 3. The two types of HAWT are (A) , (B),and VAWT are (C) , and (D). 4. The tower shadow is one of major concern of (A) upwind turbine, (B) downwind turbine or (C) vertical wind turbine. 5. The advantages of VAWT are (A) does not need to turn toward the wind (B) all powertrain components in the ground level, and (C) very stable. 6. The self-starting VAWT is (A) Darrieus wind turbine (B) Savonius wind turbine or (C) straight blade wind turbine. 7. Smaller number of blade will require (A) higher starting speed, (B) lower starting speed, (C) can self-starting. 8. Since air flow is not confined, the interference factors are used to compensate the air flow through the blade and there are (A) and (B) 9. For a self-starting Savonius vertical wind turbine, it has relative (A) high torque or (B) low torque at low wind speed. 10. The overall power generated by a wind turbine can be determined by the linear average wind speed during the period which is (A) True, or (B) False.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
image
Engineering, 04.07.2019 19:20, carterdaw
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
image
Engineering, 06.07.2019 03:20, lelen2021
Steam at a pressure of 100 kpa and a quality of 50% initially fills a rigid vessel having a volume of 0.5 m^3. the steam is then heated, causing the pressure in the vessel to rise to 150 kpa. determine: i. the mass of the steam in the vessel. ii. the temperature and quality of the steam after the heating process. ii the mass of the vapour, mg and liquid, m in the vessel after the heating process. if the steam in the vessel is now further heated, what would the pressure and temperature in the vessel be when all steam has turned into saturated vapour? b. sketch the processes in part (a) and part (b) on p-v and t-v diagrams, indicating clearly the temperatures, pressures and the paths. c. (0.59kg, 111.4°c, 73%, 0.4307kg, 0.1 593kg, 2.11 bar, 121.84°c)
Answers: 1
You know the right answer?
g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) F...

Questions in other subjects:

Konu
Chemistry, 04.12.2021 14:50