Engineering, 11.03.2021 07:50 kingz28

Differentiate between pulser switch and data switch

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, lovenahofer

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

continue

Engineering, 06.07.2019 02:30, jayjay5246

Air (c-1.006 kj/kg. k, r-0.287 kj/kg. k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

continue

Engineering, 06.07.2019 04:30, BARRION1981

Mention three advantages and two disadvantages of cmm.

Answers: 1

continue

Engineering, 06.07.2019 05:20, kutubmia

The 10lb block has an initial velocity of 10 ft/s on the smooth plane. if a force f (2.5 t) lb, where t is in seconds, acts on the block for 3 s, determine the final velocity of the block and the distance the block travels during this time.

Answers: 3

continue

You know the right answer?

Differentiate between pulser switch and data switch...