Engineering, 02.03.2021 18:10 rosezgomez97
SAE-30 oil at 30–Cfills the gap between a40-cm-diameter flat disk rotating 0.16 cm above aflat surface. Estimate the torque needed to rotate the disk at
Answers: 1
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
SAE-30 oil at 30–Cfills the gap between a40-cm-diameter flat disk rotating 0.16 cm above aflat surfa...
Mathematics, 29.06.2019 10:30
Physics, 29.06.2019 10:30
English, 29.06.2019 10:30
Mathematics, 29.06.2019 10:30