Engineering, 02.03.2021 02:00 sherylpoche23

1) A hydraulic cylinder is used to lift a 6000 Ibs load straight up 1 foot in 2 seconds. The bore diameter of the cylinder is 3.5 in. The maximum system pressure is 1000 psi. A hydraulic pump that runs at 1750 rpm is used to provide the required flow rate. Assuming the pump has a volumetric and total efficiency of 85% and 80%, respectively, calculate a) the actual and theoretical pump delivery (gpm). (7 points) b) the pump volumetric displacement (in3 /rev). (3 points) c) the maximum power input to the pump (hp). (5 points

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 19:10, jimena15

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

continue

Engineering, 04.07.2019 19:20, praveen35301

Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer

Answers: 1

continue

Engineering, 06.07.2019 03:20, dinapearce1403

Write a technical essay (maximum two pages) about stress concentration. and paste from the textbook. instead, read updated material about this phenomenon and provide a technical evaluation of the different techniques to avoid/reduce such phenomenon. consider in your analysis cutting-edge computational techniques such as fea to study and analyze stress concentrations.

Answers: 2

continue

You know the right answer?

1) A hydraulic cylinder is used to lift a 6000 Ibs load straight up 1 foot in 2 seconds. The bore di...