Engineering, 02.03.2021 01:40 alimfelipe

4. The maximum dry density of a proposed borrow soil was found to be 2.2 Mg/m3, and the optimum water content was 13%. The borrow soil has a natural water content of 10%, a degree of saturation of 50%, and a specific gravity of solids of 2.63. Specifications require the borrow soil to be compacted to 95% of the maximum dry density.(a) How many cubic meters of borrow soil will be required to make one cubic meter of compacted fill at the specified dry density?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

You know the right answer?

4. The maximum dry density of a proposed borrow soil was found to be 2.2 Mg/m3, and the optimum wate...