A thin 20-cm*20-cm flat plate is pulled at 1m/s horizontally through a 4-mm thick oil layer sandwiched between two stationary plates, as shown in the figure. the dynamic viscosity of oil is 0.03pa. s .assuming the velocity in each layer to vary linearly, plot the velocity profile and explain why the profile takes that shape and determine the force that needs to be applied on the plate to mantain this motion when the h1=1.5mm and h2 2.5mm

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k