subject
Engineering, 01.03.2021 01:00 leannaadrian

Para descongelar el hielo acumulado en la superficie exterior del parabrisas de un automóvil, se aplica aire caliente sobre su superficie interna. Considere el parabrisas de un automóvil con un espesor de 5 mm y una conductividad térmica de1.4 W/m · K. La temperatura ambiente exterior es de –10°C y el coeficiente de transferencia de calor por convección es de 200W/m2· K, en tanto que la temperatura ambiente interna del automóvil es de 25°C. Determine el valor del coeficiente de transferencia de calor por convección para el aire caliente aplicado sobre la superficie del parabrisas necesario para empezar a derretir el hielo acumulado.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, margaret1758
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Para descongelar el hielo acumulado en la superficie exterior del parabrisas de un automóvil, se apl...

Questions in other subjects: