Engineering, 28.02.2021 23:20 ronaldhernandez598
Determine the magnitude of the force F and the angle theta, knowing that the moments of F about the x and y axes are, respectively, Mx = -240 lb•in and My = -160 lb•in
Answers: 1
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Determine the magnitude of the force F and the angle theta, knowing that the moments of F about the...
Mathematics, 21.10.2019 22:30
Physics, 21.10.2019 22:30
Law, 21.10.2019 22:30
Chemistry, 21.10.2019 22:30
Mathematics, 21.10.2019 22:30
Mathematics, 21.10.2019 22:30