Engineering, 28.02.2021 16:40 Prettygirlyaya

Derive a basic analytical model for the volume build rate of a direct, single-laser SL process in terms of the following parameters: Effective laser spot size, the cured line width on the surface (Lw) and scan speed (V); liquid resin layer thickness (Zr) and cure (volume) shrinkage (S); and the time per layer to configure the liquid, wiper time (tw). Assume neighboring tracks are just touching (not overlapping). Apply this model to the following problems: a. For Zr = Lw = 0.1 mm, Vs = 2000 mm/s, and S = 15 vol %, what is the volume build rate per hour, neglecting the wiper time.
b. From (a), calculate the time to build a single 10 x 10 cm layer and a 10-cm cube (= 1 L).
c. For what wiper cycle time, does the wiper time add 10% to the total time in this case.
d. For what (smaller) layer area does the wiper time double the total time.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

Derive a basic analytical model for the volume build rate of a direct, single-laser SL process in te...