subject
Engineering, 26.02.2021 17:30 goeringwilliam5470

A differential leveling circuit began on BM Hydrant (elevation 1823.65 ft) and closed on BM Rock (elevation 1841.71 ft). The plus sight and minus sight distances were kept approximately equal. Readings (in feet) given in the order taken are 8.04(+S) on BM Hydrant, 5.63 (-S) and 6.98 (+S) on TP1, 2.11 (–S) and 9.05 (+S) on BM 1, 3.88 (–S) and 5.55 (+S) on BM 2, 5.75 (–S) and 10.44 (+S) on TP2, and 4.68(–S) on BM Rock. Prepare, check, and adjust the notes.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 19:20, molly7654
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
image
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
A differential leveling circuit began on BM Hydrant (elevation 1823.65 ft) and closed on BM Rock (el...

Questions in other subjects:

Konu
History, 25.11.2019 18:31