Engineering, 25.02.2021 20:00 2023jpeterson

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) protected (d) none of above
26
To eliminate entrapment of moisture, it is advised to
(a) make corners smooth
(b) coat the containers
(c) use corrosion resistant alloy, like cupro-nickel (d) provide a drainage hole
27 Storage containers should be designed in such a way that
(a) No crevices are formed
(b) No obstacle to drainage occurs
(c) The design should ensure that the containers are drained in minimum time
(d) the containers should be constructed from plastics rather than metals or allows
28 The corrosion resistance of metals, such as stainless steels and copper alloys.
depends upon the buildup of uniform surface films. Which one of the following
would require a maximum attention of the designer?
(a) Accessibility of oxygen in the operating medium.
(b) Coating of the metal
(c)The drainage capability of the vessel (d)
The period of storage of the liquid in the container

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ahmedeldyame

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

continue

Engineering, 04.07.2019 18:20, 3076850

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)

Answers: 2

continue

Engineering, 04.07.2019 19:10, babas97

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

continue

Engineering, 04.07.2019 19:20, carterdaw

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

continue

You know the right answer?

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) pro...