A six cylinder 3.2-liter engine operates on a four-stroke cycle at 2400 RPM. The compression ratio is 10.2:1. The bore and stroke are related as S=1.12*B. Calculate: 1. Clearance volume of one cylinder in cm3, L and in in3. 2. Bore and stroke in cm and in 3. Average piston speed in m/sec and ft/sec 4. Piston speed when the crank angle is θ=90° aTDC in m/sec

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

What is the main objective of using reheat rankine cycle?