Engineering, 19.02.2021 03:00 robertgib76
The Tryon Creek Wastewater Treatment Plant discharges an average of 8.3 million gallons per day into the Willamette River. Upstream of the discharge point, the Willamette River is 45 feet wide and 15 feet deep (on average), and the average velocity is 10 ft/s. Neglect density differences due to the wastewater. Determine: a. flow rate downstream of the discharge point (ft3/s)b. mass flow rate downstream of the discharge point (slugs/s)c. increase in width of the river downstream of the discharge point assuming depth and velocity do not change (ft)Hint: the cross-sectional shape of a shallow, wide river can be approximated as a rectang
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
The Tryon Creek Wastewater Treatment Plant discharges an average of 8.3 million gallons per day into...
Questions in other subjects:
