subject
Engineering, 17.02.2021 22:10 Sumitco9578

What force, in pounds, is needed to push a 50-lb weight up a 10-ft ramp to a height of 5 feet. What is the mechanical advantage of the ramp? Force = pounds MA =

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
image
Engineering, 06.07.2019 03:10, kturvey225
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
image
Engineering, 06.07.2019 05:20, deadpoolcorvettehats
In an engine working on the diesel cycle the ratios of the weights of air and fuel supplied is 50: 1. the temperature of air at the beginning of the compression is 60 °c and the compression ratio used is 14: 1. what is the ideal efficiency of the engine. calorific value of fuel used is 42000 kj/kg. assume c, = 1.004 kj/kg k and c 0.717 kj/kg k for air
Answers: 1
You know the right answer?
What force, in pounds, is needed to push a 50-lb weight up a 10-ft ramp to a height of 5 feet. What...

Questions in other subjects:

Konu
Physics, 21.02.2020 17:30