subject
Engineering, 17.02.2021 01:00 emory238

A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream and fed to a reactor overseen by Romana and Boswell. The flow rate of the fresh feed is 456 mol/hr with
mole fractions of 0.057 for butanol, 0.539 for oxygen, and the balance nitrogen. The reactor effluent
contains butanol, oxygen, nitrogen, CO2, NOx, and water (W, H20), which is fed to a separator. A gas
stream containing oxygen, nitrogen, CO2, NO2, and some of the water exits the separator, and a
butanol/water stream also exits the separator. Ninety-five times more water exits the separator in the
gas stream than exits the overall system in the purge stream. The overall conversion of butanol is 78%,
and the single pass conversion of butanol is 55%. The component flow rates of oxygen and nitrogen
leaving the separator are 65,8 mol/hr and 155 mol/hr, respectively,
In the last level, the overall system was solved. Component molar flow rates were found in units of
mol/hr as ň4,co, - 81.1. NA, NO, = 58.4, ņa, w = 100.3, no, B = 5.72, and now = 1.056,
Now, find the component molar flow rate (mol/hr) of the feed to the reactor
02,N2
NB
Ex: 29.2
02,02 =
EX 194
n2,w =
Ex: 1.50
mol/h
mol/hr
Ex: 146
mol/hr
mol/hr

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream...

Questions in other subjects:

Konu
Mathematics, 12.10.2020 21:01
Konu
English, 12.10.2020 21:01