Engineering, 16.02.2021 01:00 karmaxnagisa20

ADDI X9 X6 8 ADD X10 X6 XZR

STUR X10 [X9, 0]

LDUR X9, [ X9,0]

ADD X0, X9, X10

For each LEGv8 instruction show the value of the opcode (Op), source register (Rn), and target register (Rd or Rt) fields. For the I-type instructions, show the value of the immediate field, and for the R-type instructions, show the value of the second source register (Rm).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

You know the right answer?

ADDI X9 X6 8 ADD X10 X6 XZR

STUR X10 [X9, 0]

LDUR X9, [ X9,0]

A...