Engineering, 16.02.2021 01:00 Artemis3821
A large V8 SI four-stroke cycle engine with a displacement of 4.6 liters is equipped with cylinder cutout, which converts the engine to a 2.3 liter V4 when less power is needed. At a speed of 1750 RPM the engine, as a V8, has a volumetric efficiency of 51%, a mechanical efficiency of 75%, an air-fuel ratio of 14.5, and produces 32.4 kW of brake power using gasoline. With cylinder cutout and operating at higher speed as a V4, the engine has a volumetric efficiency of 86%, a mechanical efficiency of 87%, and uses an air-fuel ratio of 18.2. Indicated thermal efficiency can be considered the same at all speeds, and assume combustion efficiency is 100%. Calculate:
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
A large V8 SI four-stroke cycle engine with a displacement of 4.6 liters is equipped with cylinder c...
Questions in other subjects:
History, 20.03.2020 19:12
History, 20.03.2020 19:13
