Engineering, 15.02.2021 20:20 Almonte87

The operator of a CNC machine gets paid $60/hour. It takes him 9 mini to load and unload a part (i. e. handling time), and 4 mini to change the cutting tool (which has Taylor coefficients of 0.251 and 900 m/min)|. When he runs the spindle at 900 rpm it finishes a part in 11 mini. His cutting tool costs him $95 each and he is able to machine 80 parts| before having to replace the tool. He wants to know if he can save money by running the spindle at 1400 rpm. What is the cost per part at 900 rpm and at 1400 rpm? C = vT^n rightarrow T_2/T_1 = (C/v_2)^1/n/(C/v_1)^1/n = (v_1/v_2)^1/n

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

You know the right answer?

The operator of a CNC machine gets paid $60/hour. It takes him 9 mini to load and unload a part (i....