Engineering, 15.02.2021 19:40 gigglegirl5802

Cortical bone sample has 200 mm long, outside Dia. 50 mm and 40 mm diameter medullary cavity. It is fixed with 20 mm diameter metal prosthetic device and bone cement in it. The axial compressive load 1KN is applied. Calculate the following: a) Stresses and strains in longitudinal direction each component. b) An equivalent modulus with and without bone cement. Compare the two equivalent Moduli.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

You know the right answer?

Cortical bone sample has 200 mm long, outside Dia. 50 mm and 40 mm diameter medullary cavity. It is...