Engineering, 12.02.2021 05:30 abhibhambhani

A 2-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k 0.13 W/m K), and the wire/sheath interface is characterized by a thermal contact resistance of . The convection heat transfer coefficient at the outer surface of the sheath is 10 W/m2 K, and the temperature of the ambient air is 20 C. If the temperature of the insulation may not exceed 50 C, what is the maximum allowable electrical power that may be dissipated per unit length of the conductor

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

You know the right answer?

A 2-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k 0.13 W/m K), and t...